Home > Network > Technical Information for Advanced Users > Reset the Network Settings to the Factory Settings

Reset the Network Settings to the Factory Settings

You can reset the print server to its default factory settings. This resets all information, such as the password and IP address.
  • You can also reset the print server to its factory settings using BRAdmin Light or Web Based Management.
  1. Make sure the power cord is plugged in, the top cover is closed and the machine is turned off.
  2. While holding down , open and close the top cover.
  3. Release . Make sure that all the LEDs turn off.
  4. Press six times.
    The machine will restart.
Related Information

Go to top of page